Summary of Earlier AS/400, AS/400e, and iSeries Models 787
Summary of Earlier AS/400, AS/400e, and iSeries Models
Custom Mixed-Mode Servers
9406 Model S20 Custom Mixed-Mode Server
Note 1: CPW is the Commercial Processing Workload that is now being used to measure the performance of all
iSeries and AS/400e processors. The CPW value is measured on maximum configurations. The type and
number of disk devices, the number of workstation controllers, the amount of memory, the system model,
other factors, and the application being run determine the performance that is achievable. All iSeries and
AS/400e processors announced from September 1996 onward have only CPW performance measurements.
Note 2: This total includes the MFIOP. The combination of internal and external IOPs cannot exceed this number.
Note 3: The maximum combination of 2440, 7208 or 9348 and Tape Libraries may not exceed four.
Note 4: Processor Group is determined by a combination of the Processor and Interactive Feature. The following
table provides a cross reference.
Processor Interactive Feature System Feature Code Processor Group
#2069
#1514 2D6B P40
#1510 2D6C P50
#1511 2D6D P50
#1512 2D6E P50
#2070
#1514 2E6A P40
#1510 2E6B P50
#1511 2E6C P50
#1512 2E6D P50
#1513 2E6E P50
Note 5: The system maximum for internal tapes and CD-ROMs is 18.
Model S20
Processor Feature #2170
23
#2177 #2178
Relative System Performance (CPW)
1
Client/Server Environment
Interactive Environment
464.3
49.7
759.0
110.7
759.0
221.4
Number of Processors 2 4 4
Main Storage (MB) Minimum/Maximum 256-4096 256-4096 256-4096
Processor Group P20 P20 P20
To Next Page
Loading...
Need help?
General
