To Next Page

To Previous Page

iSeries Model SB2

A minimum functional server consists of the base server unit

and selected priced features. Included in the base server

are the physical package and power elements, a DASD

controller, an I/O controller, 12288 MB of Main Storage and

a #9771 Base PCI 2-Line WAN with Modem as follows:

• System Unit (CEC) and #9074 Base I/O Tower

• Line cord features

• Power

• Main Storage Expansion Card (Quantity two) (CCIN

2881)

• Main Storage

48 Main Storage DIMMs, 256 MB DIMMs (128 Mb

technology) (CCIN 300F) are shipped as “base” with

each SB2

• #9752 Bus Expansion/Clock Card: Eight HSL Ports (CCIN 25AD)

• PCI and CSP Card (CCIN 28AA)

• Bus Adapter (CCIN 2681)

• Operator Panel (CCIN 247A)

• #9074 Base I/O Tower

• #9943 Base PCI IOP

– Provides support for #9778 Base PCI RAID Disk Unit Controller

Provides support for four Disk Units, the required CD-ROM/DVD-RAM, and a feature

Internal Tape or a feature CD-ROM/DVD-RAM.

– Provides support System Console/Communications Adapter

• #9771 Base PCI 2-Line WAN w/Modem

Note: In countries where the #9771 is not homologated, the marketing configurator adds

a #4745 PCI Two line WAN IOA, a #0032 modem feature, and a #0348 cable to the order.

The #4745 is mandatory and cannot be removed from the system until the #9771

homologation is completed. The #0032 and #0348 features may be removed from the

order/system at any time.

iSeries Model SB2 System Unit

IBM i Series Handbook

Other manuals for IBM i Series