To Next Page

To Previous Page

I/O Processor 285

I/O Processor

• A #0325 IPCS Extension Cable for Windows is the default (but may be removed).

• A minimum of 128 MB Server Memory is required.

• The #1700 (IPCS Keyboard/Mouse for Windows) is the default (in those countries that

offer it).

• A display must be connected to the Integrated xSeries Server to support Windows.

For non-US keyboard/mouse and display, see

http://www.as400.ibm.com/nt

The #2799/#2899 Integrated xSeries Servers require OS/400 V5R1 plus PTFs, or later. For

required PTF information, refer to Informational APAR II13105 at:

http://www-912.ibm.com/supporthome.nsf/document/10000035

Migration Tower Hardware PCI

#2809 PCI LAN/WAN/Workstation IOP

This feature controller IOP can be used for attaching PCI LAN, WAN, and Workstation IOAs

to the system. The #2809 supports different combinations of cards depending on where it is

installed in the #503x Migration Tower. It is supported for migration only in the #503x

Migration Tower.

#2824 PCI LAN/WAN/Workstation IOP

This IOP is a feature I/O processor with 32 MB of memory installed in the #5034 and #5035

Migration Tower I and in the #5065 PCI Expansion Tower and the #5066 1.8M I/O Tower. It is

supported for migration only in the #503x Migration Tower.

#2851 PCI Integrated PC Server

The #2851 Integrated PC Server contains a 166 MHz Pentium processor, four IOP memory

slots, and two LAN IOA slots. Supported for migration only in #503x Migration Towers.

#2854 PCI Integrated PC Server

The #2854 Integrated PC Server contains a 200 MHz Pentium processor, four IOP memory

slots, and two LAN IOA slots. Supported for migration only in #503x Migration Towers.

#2865 PCI Integrated Netfinity Server

The Integrated Netfinity Server contains an Intel 333 MHz Pentium II processor, four main

storage slots, and two LAN IOA slots. The Integrated Netfinity Server provides high

performance serving to LAN attached PCs. OS/2 Warp Server for AS/400, Novell NetWare,

Lotus Domino, Flowmark, Firewall for AS/400, and Microsoft Windows NT Server are

IBM i Series Handbook

Other manuals for IBM i Series