iSeries Model 830 169
iSeries Model 830
Note: Capacity Upgrade on Demand (CUoD) is described in “Workload and Performance” on
page 41.
Interactive Features
The Model 830 supports various levels of interactive performance through the installation of
interactive features.
Interactive CPW is an approximate value reflecting the portion of Processor CPW that can be
used for workloads performing interactive-based tasks (5250).
• Any system administration job submitted to batch is not considered interactive work.
• Any use of Operations Navigator (GUI administration functions) is not considered
interactive work.
For a discussion of how these features influence system performance, see “Workload and
Performance” on page 41.
A feature cross-reference table provided on the AS/400 system can be used to relate the
Processor Feature Code to the Processor and Interactive features visible in the AS/400
configurator. The Processor Feature Code is found by displaying the QPRCFEAT system
value or in the rack configuration. The Processor Feature Code is used when ordering
software license keys. Or refer to the Model 830 processor/interactive feature table on page
166.
Processor Group is determined by a combination of the Processor and Interactive Feature.
This table provides a cross reference for the Model 830.
Processor Interactive Feature Processor Feature Processor Group
#2400
#1531 #23C1 P20
#1532 #23C2 P30
#1533 #23C3 P30
#1534 #23C4 P30
#1535 #23C5 P30
#2402
#1531 #23D1 P30
#1532 #23D2 P40
#1533 #23D3 P40
#1534 #23D4 P40
#1535 #23D5 P40
#1536 #23D6 P40
To Next Page
Loading...
Need help?
General
