Upgrades to iSeries 8xx Servers 207
Upgrades to iSeries 8xx Servers
– Existing Line cord is used on #5034/#5035
– Replace the existing planar with a new planar
– Modify the operator panel
– Add new microcode to the operator panel
– Add internal HSL, J-TAG, and ISO cables/assemblies
• Memory
– Main Storage DIMMs migrate (32 MB DIMMs do not migrate) from an old CEC to an
820 CEC.
– Base CCIN 3001 (64 MB) does not migrate and is property of the customer.
– Base CCIN 3002 (256 MB) migrates to 820 CEC. Marketing configurator will add a
quantity of two #3000 specify codes to the model upgrade order for administrative
purposes. Each #3000 represents one #3002 DIMM.
– The #3001 features do not migrate and belong to the customer.
– The #3002 and #3004 features migrate to the new 820 CEC.
• New power supply shipped with the 820 system.
• New line cord shipped with the 820 system.
• Ship HSL and SPCN cables (must be ordered since they are not included in migration
tower conversion).
• Existing DASD remains with and in the #5034/#5035.
• Existing workstation adapters remain with and in the #5034/#5035.
• Existing LAN adapters remain with and in the #5034/#5035.
• Existing expansion towers remain attached (if desired) to the #5034/#5035.
• The modem is not changed.
• If any mirroring specify codes exist, they are migrated and apply to the entire 820
system (“old” side and new).
• If the #0044 exists, it is migrated but is treated as #0044 on the “old side” and is
treated as #0041 on the new side.
RISC to RISC Data Migration (#0205)
This specify code is used when a customer orders a new (RISC) AS/400e server to replace
an existing (RISC) AS/400e. The #0205 is orderable on any initial order iSeries 270 or 8xx
model. Preloading Licensed Programs, by manufacturing, is not allowed with the #0205.
Manufacturing only loads SLIC up through QSYS of OS/400 when #0205 is ordered.
The #0205 and #5000 are mutually exclusive.
To Next Page
Loading...
Need help?
General
