IBM i Series Handbook

iSeries Model 250 Packages and AS/400e Server 250 109
iSeries Model 250 Packages and AS/400e Server 250
Notes:
1. A maximum of one High Speed LAN/ATM or maximum of two low speed LANs per
controller.
2. If an Integrated Server is in slots E02/E04, E03 must remain empty.
3. A maximum of one LAN in E11 or E12 with Integrated Server in E02/E04.
4. The disk units in the expansion unit are controlled by the #2763 or #2748 disk controller in
the System Unit.
5. Communications cards #2750, #2751, and #2761 are allowed in slots E03, E08, and E09
(maximum one per IOP).
350 Watt Power Supply
9406 Model 250 #7102 System Expansion Unit
#2718/#2729#2723/#2724/#2745/#2746/#2750/#2751/
#2761/#2838/#281x/#4801
Slot
E13
E14
E09
E10
E08
E07
E06
E05
#2723/#2724/#2745/#2746
Base Controller (CCIN 2824)
#2729/#2718/#2745/#2746/#2750/#2751/#2761/#4801
#2723/#2724/#2745/#2746/#2750/#2751/#2761/#2815/
#2816/#2818/#2838/#4801
Feature Controller Slot #2824
Integrated Server LAN IOA #2723 / #2724
Integrated Server LAN IOA #2723 / #2724 / #2838
Integrated Server Processor Card Slot #2866
Integrated Server Bridge Card Slot (reserved position)
E12
E11
E04
E02
E03
#2723/#2724/#2745/#2746
#2723/#2724/#2745/#2746
#2723/#2724/#2745/#2746
Disk Unit
Disk Unit
Disk Unit
Disk Unit
Disk Unit
Disk Unit
F11
F12
F13
F14
F15
F16
PCI Cards
Slot
Speed
Low
Low
Low
High
Low
High
High
High

IBM i Series Specifications

General

Operating System	IBM i
Form Factor	Rack, Tower
Storage	SSD and HDD options
Security	compliance
Virtualization	IBM PowerVM
CPU	POWER processors
Scalability	Scale-up