IBM i Series

Internal Magnetic Media 349
Internal Magnetic Media
The #4430 is capable of writing and reading 4.7 GB on a single disk. The #4430 is also
capable of reading 650 MB CD-ROM disks.
The #4430 can be used for Alternate IPL, program distribution, and data interchange (using
ISO 9660 and UDF formats). The #4430 is not supported as an Alternate Installation Device
(by “Boot Manager” in DST) with OS/400 V5R1.
Prerequisites: Disk unit controller in the CEC or tower where the device is mounted and
OS/400 V4R5 with PTFs.
#4525 CD-ROM
The #4525 is a feature CD-ROM that can be mounted in the system unit of Models 270 and
820.
The #4525 can be used for Alternate IPL (IBM distributed CD-ROM media only) and program
distribution. It is a CIF.
#4530 DVD-RAM
The #4530 is an optional feature that mounts in the system unit of Models 270 and 820.
DVD-RAM may be selected in place of a CD-ROM drive in the minimum server configuration.
The #4430 is capable of writing and reading 4.7 GB on a single disk. The #4430 is also
capable of reading 650 MB CD-ROM disks.
The #4430 can be used for Alternate IPL, program distribution, and data interchange (using
ISO 9660 and UDF formats). The #4430 is not supported as an Alternate Installation Device
(by “Boot Manager” in DST) with OS/400 V5R1.
Prerequisites: Disk unit controller in the CEC where the device is mounted. OS/400 V4R5
with PTFs or later is required.
#6325 Optional CD-ROM Feature
This is available on System Unit Expansion Towers #5072 and #5073 for Models Sxx, 6xx,
and 7xx.
Prerequisite: The #2624 Storage Device Controller.
Maximum one per I/O tower and Model 740 System Unit; one per Model 730 System Unit.
Limits the use of tape in the same tower to #6380 and #6390.