Icom IC-R30 - Page 161

7
OTHER FUNCTIONS
7-50
•
P25 RX status data
Command: 20 0701, 20 0702
Data Function Description
bit7 0 (Fixed) —
bit6 0/1 — (Reserved)
bit5 0/1 Receive
status
While receiving a P25 signal, “1” is returned. (Regardless of NAC)
bit4 0/1 Last call
finisher
When the last call was finished by a user, “1” is returned.
bit3 0/1 Receiving a
signal
When the audio tone can be heard, “1” is returned.
bit2 0/1
Emergency
call
While receiving an emergency call, “1” is returned.
bit1 0/1 Interfere
detection
While under an interference (Mode icon P25 and FM alternately blink), “1” is
returned.
bit0 0/1
Encryption
When the call is
encrypted
, “1” is returned.
•
dPMR RX status data
Command: 20 0901, 20 0902
Data Function Description
bit7 0 (Fixed) —
bit6 0/1 — (Reserved)
bit5 0/1 dPMR mode While receiving a dPMR Tier 2 signal, “1” is returned.
bit4 0/1 Receive
status
While receiving a dPMR signal, “1” is returned. (Regardless of CC or
COM ID)
bit3 0/1 Last call
finisher
When the last call was finished by a user, “1” is returned.
bit2 0/1 Receiving a
signal
When the audio tone can be heard, “1” is returned.
bit1 0/1 Interfere
detection
While under an interference (Mode icon dPMR and FM alternately
blink), “1” is returned.
bit0 0/1
Scrambler When the call is scrambled, “1” is returned.
■ CI-V information
D Commands (Continued)