14
PRIORITY WATCH
14-7
During the Priority scan4.
Sequentially checks the Memory or Bank channels ev-
ery 5 seconds, while receiving on a VFO frequency.
When a signal is received5.
•When“ON”isselected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks on the screen.
- The scan pause timer and resume settings are the
same as for a normal scan. (p. 16-18)
•When“Bell”isselected.
When a signal is received on the priority channel,
a beep sounds and the “
” icon blinks on the
screen.
Example:
Sequentially c
hecks the Memory channels while
receiving on 145.800 MHz frequency.
Example:
Sequentially c
hecks Bank channels while re-
ceiving on 145.800 MHz frequency.
VFO frequency and a Memory/Bank scan (Continued) ■
Appears
Checks the Memory chan-
nel every 5 seconds.
The Memory chan-
nels are sequential-
ly checked.
Checks the Bank channel
every 5 seconds.
The bank channels
are sequentially
selected.
Appears
Automatically selects the Memory channel.
Remains the VFO mode.
Example: In case of the Memory scan
Blinks
Blinks
Appears
Appears
To Next Page
Loading...
Need help?
General
