14
PRIORITY WATCH
14-8
Checks the selected priority channel every 5 seconds,
during a VFO mode scan.
Set the priority channel1.
• In case of the Memory channel
q Push [M/CALL]
to select the Memory mode.
w Rotate [DIAL] to select the Memory channel you
want to watch.
•IncaseoftheBankchannel
q Push [M/CALL] to select the Memory mode.
w Rotate [DIAL] to select the Bank channel you
want to watch.
How to select the Memory and Bank:
z In the Memory mode, push [QUICK]
.
x Push D-pad() to select “Bank Select,” and
then push D-pad(Ent).
•TheBanklistisdisplayed.
c Push D-pad() to select a desired bank and
then push D-pad(Ent).
•If“OFF”isselected,cancelthebankselection.
• In case of the Call channel
q Push [M/CALL] one or more times to select
the Call channel mode.
w Rotate [DIAL] to select the Call channel you want
to watch.
Start the Priority scan2.
q Push [QUICK]
.
w Push D-pad() to select “PRIO Watch,” and then
push D-pad(Ent).
e Push D-pad() to select “ON” or “Bell.”
•ON :Whena signalis received onthe priority
channel, the channel is automatically se-
lected.
•Bell:Whena signalis received onthepriority
channel, the “ ” icon is displayed in the
VFO mode.
r Push D-pad(Ent) to start the Priority scan.
•The“PRIO”iconappears.
StarttheVFOscan3.
q Hold down [SCAN]
for 1 second.
w Push D-pad() to select the scan type, and then
push D-pad(Ent) to start the VFO scan (p. 13-5).
NOTE:Push [CLR] to cancel both scans.
■ VFOscanandaprioritychannel
Example: Checks memory channel “490”
every 5 sec-
onds,
during a VFO scan.
Continued on the next page. ☞
Push [M/CALL] ,
then rotate [DIAL] to se-
lect the Memory chan-
nel.
Push [QUICK] .
Push D-pad() to
select, then push
D-pad(Ent).
Push D-pad() to
select, then push
D-pad(Ent).
Hold down [SCAN]
for 1 second.
Push D-pad() to
select, then push
D-pad(Ent).
Blinks
Blinks
[DIAL]
To Next Page
Loading...
Need help?
General
