14
PRIORITY WATCH
14-9
When a signal is received.5.
•When“ON”isselected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
•When“Bell”isselected.
When a signal is received on the priority channel,
a beep sounds and the “
” icon blinks. The VFO
scan resumes.
Blinks
VFO scan and a priority channel (Continued) ■
Checks the Bank channel
every 5 seconds.
During the Priority scan4.
Checks the selected priority channel every 5 seconds,
while VFO scanning
Appears Appears
Checks the Memory chan-
nel every 5 seconds.
Example:
Checks M-CH “490” while VFO scanning
Example:
Checks Bank-CH “D06” while VFO scanning
Appears Appears
Blinks
Example:
Checks Call-CH “C3” while VFO scanning
Appears Appears
Blinks
Checks the Call channel
every 5 seconds.
Automatically selects the priority channel.
Remains the VFO mode.
Example: In case of the Memory channel
Blinks
Blinks
Blinks
Blinks
To Next Page
Loading...
Need help?
General
