14
PRIORITY WATCH
14-15
When a signal is received.5.
• When “ON” is selected.
When a signal is received on the priority channel, the
channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel,
a beep sounds and the “PRIO” icon blinks on the
screen.
Automatically selects the priority channel.
Remains the DR mode.
Example: In case of the Memory channel
Blinks
Blinks
DR mode and ■
a priority channel (Continued)
To Next Page
Loading...
