14
PRIORITY WATCH
14-16
■ DR mode scan and a priority channel
The DR mode scan starts.
[DIAL]
Example: Checks “145.800 MHz” every 5 seconds, dur-
ing the DR mode scan
Checks the selected priority channel every 5 seconds,
during a DR mode scan.
Set the priority channel1.
• In case of the VFO frequency
q Push [V/MHz]
to select the VFO mode.
w Rotate [DIAL] to set the receive frequency.
• In case of the Memory channel
q Push [M/CALL] to select the Memory mode.
w Rotate [DIAL] to select the Memory channel you
want to watch.
• In case of the Bank channel
q Push [M/CALL] to select the Memory mode.
w Rotate [DIAL] to select the Bank channel you
want to watch.
HowtoselecttheMemoryandBank:
z In the Memory mode, push [QUICK]
.
x Push D-pad() to select “Bank Select,” and
then push D-pad(Ent).
• The Bank list is displayed.
c Push D-pad() to select a desired bank and
then push D-pad(Ent).
• If “OFF” is selected, cancel the bank selection.
• In case of the Call channel
q Push [M/CALL] one or more times to select
the Call channel mode.
w Rotate [DIAL] to select the Call channel you want
to watch.
Start the DR mode scan2.
q Hold down
for 1 second to select the DR
mode.
w Hold down [SCAN] for 1 second.
• The DR mode scan starts.
Start the Priority scan3.
q Push [QUICK]
.
w Push D-pad() to select “PRIO Watch,” and then
push D-pad(Ent).
e Push D-pad() to select “ON” or “Bell.”
• ON : When a signal is received on the priority
channel, the channel is automatically se-
lected.
• Bell : When a signal is received on the priority
channel, the “ ” icon is displayed in the
VFO mode.
r Push D-pad(Ent) to start the Priority scan.
• The “PRIO” icon appears
NOTE:
• You can start the priority scan (Step 3) before start-
ing the DR mode scan (Step 2).
• Push [CLR] to cancel the Priority scan and the
DR mode scan.
Continued on the next page. ☞
Rotate [DIAL] to set the
receive frequency.
Hold down
for 1 second.
Hold down [SCAN]
for 1 second.
Push [QUICK]
.
Push D-pad() to
select, then push
D-pad(Ent).
Push D-pad() to
select, then push
D-pad(Ent).
To Next Page
Loading...
