16
MENU SCREEN
16-14
Menu items and Default settings (Continued) ■
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
Sets the beep output level.
Selects whether or not the beep output level
can be adjusted by the [VOL] control.
Turns the confirmation beep tones when
key is pushed, ON or OFF.
Turns the scan stop beep ON or OFF.
Turns the standby beep function in the DV
mode ON or OFF.
Selects the audio output option during a
sweep.
Sets to automatically correct the time us-
ing a GPS signal.
Sets the current date and time.
Enters the time difference between UTC
and the local time.
Turns the Auto power OFF function ON or
OFF.
Sounds
Beep Level
Beep/Vol Level Link
Key-Touch Beep
Scan Stop Beep
Scope AF Output
Standby Beep
0~3~9
In this item, set the Sound options.
OFF or ON
OFF or ON
OFF or ON
OFF or ON
OFF, ON or ON (to me:High Tone)
Time Set
Date/Time
GPS Time Correct
UTC Offset
Auto Power OFF
In this item, set the Time options.
OFF or Auto
–14:00~±0:00~+14:00
OFF, 30min, 60min, 90min or 120min
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
SD Card*
Load Setting
Save Setting
File selection
<<New File>>
File selection
ALL, Except My Station,
Repeater List Only
In this item, set the microSD card options.
Format
SD Card Info
Unmount
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
Unmounts the card.
Formats the card.
Loads the settings file to the transceiver.
Saves the settings as a new file.
Saves the settings in a selected file.
Displays the free space and remaining re-
cording time of the card.
Selects to mute the SUB band audio signal
while receiving on the MAIN band, and/or
sound a beep when a signal disappears
on the SUB band.
Sub Band Mute OFF, Mute, Beep or Mute & Beep
Turns the Home CH Beep ON or OFF.
Home CH Beep OFF or ON
Turns the Band edge beep ON or OFF.
Band Edge Beep OFF or ON
Selects to adjust the audio output level of
all bands together, all separately, or just
the BC Radio separately.
Volume Select All, BC Radio Separate or Separate
Sets the initial audio output level difference
between the BC Radio and the A and B
bands when “All” is set in “Volume Select.”
BC Radio Level –5~0~+5
Turns the Earphone mode ON or OFF.
Earphone Mode OFF or ON
* Be sure to insert the microSD card into the
transceiver before selecting these items.
To Next Page
Loading...
Need help?
General
