Icom ID-51A Advanced Instructions

16
MENU SCREEN
16-15
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
Menu items and Default settings (Continued) ■
Others
Clone Clone Mode
Clone Master Mode
In this item, set the
DESCRIPTIONS
Reads or writes the CS-51 data from or
to the PC, and/or to receive data from a
Master transceiver.
Writes your ID-51A/E (Master) data to an-
other ID-51A/E (Sub).
Information Voltage
Version
Shows the battery voltage.
Shows the transceiver’s firmware version
number.
Reset Partial Reset
All Reset
Returns all settings to their defaults, with-
out clearing the memory contents, call
sign memories or repeater lists.
Clears all programming and memories,
and return all settings to their defaults.
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)