16
MENU SCREEN
16-21
Deleting the link channel
Push D-pad( q ) to select the programmed scan link number that the chan-
nel you wish to delete is assigned to, and then push D-pad(Ent).
Push D-pad( w ) to select programmed scan number you wish to delete.
(For example: 01: 144.000-450.000)
Push [QUICK] e .
r Push D-pad() to select “Delete,” and then push D-pad(Ent).
• The channel is deleted.
Push [MENU] t to exit the Menu screen.
Program scan link name programming
q Push D-pad() to select a program scan link number between 0 and 9.
Push [QUICK] w .
e Push D-pad(Ent) to enter the name edit mode.
r Rotate [DIAL] to select the first character of the name you wish to program.
(For example: A)
• The selected digit blinks.
• Push D-pad() to move the cursor backward or for-
ward.
• While selecting a character, push [QUICK]
to
change the character to an upper case or lower case
letter.
• While selecting a digit, push [QUICK]
to open
the input mode selection window.
• A space can be selected in any input mode selected.
•
Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR]
to delete the selected character,
or hold down [CLR]
to continuously delete the
characters, first to the right, and then to the left of the
cursor.
• See page 2-7 for programming details.
t Push D-pad() to move the cursor to the second digit.
y Repeat steps r and t to enter a name of up to 16 characters, including
spaces. (For example: Area 5 D-Star )
u After entering the name, push D-pad(Ent) to save.
Push [MENU] i to exit the [MENU] screen.
Scan items (Continued) ■
Selected character type
To Next Page
Loading...
