8
D-STAR OPERATION <BASIC>
8-6
Receiving your own position from the GPS re-2.
ceiver
Hold down q
for 1 second.
• The DR mode is selected.
Push D-pad( w ) to select “FROM,” and then push D-
pad(Ent).
Push D-pad( e ) to select “Near Repeater,” and then
push D-pad(Ent).
• The Repeater Search function starts.
• Up to 20 of the nearest repeaters are displayed.
Push D-pad( r ) to select “Hirano,” and then push D-
pad(Ent).
• “Hirano” is displayed in “FROM.”
NOTE: When the position data accuracy level is set
to “Approximate,” the direction data is not displayed if
the distance to the repeater is under 5 kilometers.
(p. 9-30)
NOTE:
When using the Repeater Search function, be sure to
first receive your own position data.
• If no repeater is found in a 160 kilometers range,
screen 1, as shown to the right, will be displayed.
• If the last received position can be used, screen 2, as
shown to the right, will be displayed.
“FROM” is selected.
Completed
Shows the distance
and direction from your
position to the repeater
Shows the call sign
of “Hirano430,”
Screen 1 Screen 2
“FROM” (Access repeater) setting ■
Using the Repeater Search function (Continued) D
To Next Page
Loading...
Need help?
General
