Programming IDEC SmartRelay
IDEC SmartRelay Manual 91
Indication of available memory space
IDEC SmartRelay shows you the amount of free memory
space.
Proceed as follows:
1. Switch the IDEC SmartRelay to programming mode
(as a reminder, refer to page 50).
2. Select 'Edit': Press ▲ or ▼
3. Accept 'Edit': Press OK
4. Select 'Memory?': Press ▲ or ▼
5. Accept 'Memory?': Press OK
The display now shows:
Free Memory:
Byte =1924
Block= 124
Rem = 57
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...
