IDEC SmartRelay memory cartridge (card)
212
IDEC SmartRelay Manual
6.3 Copying data from the IDEC SmartRelay
to the memory cartridge (card)
To copy the circuit program to the memory cartridge (card):
1. Insert the memory cartridge (card) into the slot.
2. Switch the IDEC SmartRelay to programming mode
(ESC / >Stop).
3. The main menu opens. To select the ‘Card’ command:
Press ▲ or ▼
4. Press OK. The transfer menu opens.
5. Move the ‘>’ cursor to ‘IDEC SmartRelay → Card’ (if re-
quired)
Press ▲ or ▼
6. Press OK.
IDEC SmartRelay now copies the circuit program to the
memory cartridge (card).
When IDEC SmartRelay has finished copying, it automati-
cally returns you to the main menu:
>Program..
Card..
Clock..
Start
IDEC SmartRelay main menu
> Card
Card
CopyProtect
= IDEC
SmartRelay
>Program..
Card..
Clock..
Start
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...
Need help?
General
