274 IDEC SmartRelay Manual
C IDEC SmartRelay without display
Because some specific applications do not require operator
control and monitoring units such as buttons or a display, we
provide the FL1C-B12RCE, FL1C-B12RCA and FL1C-
B12RCC versions without display.
View of a FL1C-B12RCC, for example:
Less is definitely more!
The versions without display offer you the following benefits:
• Even more cost-effective without the operating element.
• Requires less switch cabinet space than conventional
hardware.
• Substantial benefits with regard to flexibility and prime
costs compared to stand-alone electronic switchgear.
• Of advantage even for applications in which merely two
or three conventional switching devices can be replaced.
• Very easy to use.
• Access protected.
• Compatible to IDEC SmartRelay versions with display.
• Offers the option to read data by means of WindLGC.
I4 I5 I6
Q1 Q2 Q3 Q4
L1 N
RUN/STOP
I7 I8I1 I2 I3I1 I2 I3I1 I2 I3I1 I2 I3I1 I2 I3I1 I2 I3I1 I2 I3I1 I2 I3
12121212
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...
