IDEC SmartRelay installation and wiring
20
IDEC SmartRelay Manual
2.2.2 Wall-mounting
For wall-mounting, first slide the mounting slides on the rear
side of the devices towards the outside. You can now
wall-mount the IDEC SmartRelay by means of two mounting
slides and two
φ
M4 screws (tightening torque 0.8 to 1.2Nm).
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To Next Page
Loading...
