Page 147
POC-3174B-A330 Medical Panel PC
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the POC-3174B-A330.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions outlined below whenever the
POC-3174B-A330 is opened.
Make sure the power is turned off and the power cord is disconnected
whenever the POC-3174B-A330 is being installed, moved or modified.
Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
Electric shocks can occur if the POC-3174B-A330 chassis is opened when
the POC-3174B-A330 is running.
Do not drop or insert any objects into the ventilation openings of the
POC-3174B-A330.
If considerable amounts of dust, water, or fluids enter the
POC-3174B-A330, turn off the power supply immediately, unplug the power
cord, and contact the POC-3174B-A330 vendor.
Grounding reliability can only be achieved when the equipment is connected
to an equivalent receptacle marked “Hospital Only” or “Hospital Grade”.
The signal input parts or signal output parts (SIP/SOP) need to be connected
properly and any unused SIP/SOP shall not be accessible to unqualified
personnel after the LCD is integrated into a medical system.
The unit is for exclusive interconnection with IEC 60XXX certified equipment
To Next Page
Loading...
Need help?
General
