Name: IEI Technology POC-3174B-A330
Brand: IEI Technology
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Page 25

POC-3174B-A330 Medical Panel PC

3.1 Unpacking

To unpack the flat panel PC, follow the steps below:

WARNING!

The front side LCD screen has a protective plastic cover stuck to the

screen. Only remove the plastic cover after the flat panel PC has been

properly installed. This ensures the screen is protected during the

installation process.

Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the

external (second) box.

Step 2: Open the external (second) box.

Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the

internal (first) box.

Step 4: Lift the monitor out of the boxes.

Step 5: Remove both polystyrene ends, one from each side.

Step 6: Pull the plastic cover off the flat panel PC.

Step 7: Make sure all the components listed in the packing list are present. Step 0:

Questions and Answers:

Need help?

Do you have a question about the IEI Technology POC-3174B-A330 and is the answer not in the manual?

IEI Technology POC-3174B-A330 Specifications

General