Page 29
POC-3174B-A330 Medical Panel PC
assisting with the procedure.
Anti-static Discharge: If a user open the rear panel of the flat panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
4.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the flat panel PC
Step 2: Connect the battery connector
Step 3: Install a PCI expansion card (optional)
Step 4: Install the CF card (optional)
Step 5: Mount the flat panel PC
Step 6: Connect peripheral devicesStep 0:
4.4 Plastic Back Cover Removal
WARNING!
Take antistatic precautions when working with internal components.
The interior of the POC-3174B-A330 contains very sensitive electronic
components. These components are easily damaged by electrostatic
discharge (ESD). Before working with the internal components make sure
all the anti-static precautions described earlier have been observed.
WARNING!
Watch out for the three internal PIFA antennas when removing the
back cover. There are three PIFA antennas preinstalled on the top of the
To Next Page
Loading...
Need help?
General
