Page 28
POC-3174B-A330 Medical Panel PC
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
POC-3174B-A330 may result in permanent damage to the
POC-3174B-A330 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the POC-3174B-A330. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the POC-3174B-A330 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: - When configuring the POC-3174B-A330, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
POC-3174B-A330.
4.2 Installation Precautions
When installing the flat panel PC, please follow the precautions listed below:
Power turned off: When installing the flat panel PC, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
Certified Engineers: Only certified engineers should install and modify
onboard functionalities.
Mounting: The flat panel PC is a heavy device. When mounting the system
onto a rack, panel, wall or arm please make sure that at least two people are
To Next Page
Loading...
Need help?
General
