EN
3 - INFORMATION FOR SET UP KID 80 SIV
3 - Pag. 12 / 26
no. 66 Maximum feeding value (F)
The F point is the maximum bar pusher
feeding point: this value corresponds to the
bar pusher stroke from its completely
backwards position to point F.
This value changes according to the
different applications and should be entered
by the Installation Technician (see default
value on the side).
66
no. 66 Max feeding
value (F)
XXXX (mm)
(inches)
DEFAULT VALUE
PROGRAMMABLE
VALUE
KID KID
3740 2590
To Next Page
Loading...
