IEMCA KID 80 - Parameter Accessing and Display

EN
2 - INFORMATION FOR USE KID 80 SIV
2 - Pag. 10 / 66
2.6 PARAMETER ACCESSING AND DISPLAY
2.6.1 Access to and display of common parameters
1. Enter the "parameter display" mode: [pupa_kid_barra_oriz-sx]
2. the display shows:
to access "Common Parameters":
3. the display shows in sequence:
- Bar end adjust.
- Facing length
- Facing mode
- Piece length
- Short feeding safety
- Long feeding safety
- Corr. max. feed. pos.
- Total pieces
4. Short menu parameters may also be displayed on
the extended menu.
(EN)
Help
Machining
Parameters
Common parameters
Bar end adjust.
120.00 (mm)
4.72 (inches)
Facing length
0.000 (mm)
Facing mode
1
Piece length
0.000 (mm)
0.00 (inches)
Short feeding safety
0.000 (mm)
0.00 (inches)