IEMCA KID 80 - Hardware and Program Identification Data

5 - ATTACHMENTS KID 80 SIV
EN
5 - Pag. 3 / 12
A HARDWARE AND PROGRAM IDENTIFICATION DATA
Customer Date
Bar feeder model Y/N
Machine tool model
HARDWARE IDENTIFICATION DATA
"CPU" CARD
Model:
Serial number
ENABLING CARD (motor drive)
Model:
Serial number
Above data can be found in the "CPU" and "motor enabling" cards, which are located in electric
board.
PROGRAM IDENTIFICATION DATA
PUSH-BUTTON PANEL FIRMWARE
Number:
PUSH-BUTTON PANEL SOFTWARE
Number:
PLC/CN SOFTWARE
Number:
PLC/CN FIRMWARE
Number:
To trace these data, see section 2.12