IEMCA KID 80 - Lubrication Stop Value

3 - INFORMATION FOR SET UP KID 80 SIV
EN
3 - Pag. 13 / 26
no. 67 Lubrication stop value (L)
This parameter value should be entered.
Value where the oil pump motor for the
lubrication of the guide channels stops.
no. 68 Guide channel opening
max. value
The value of this parameter is predefined
by the program.
Position of the feeding carriage when the
guide channels open.
67
no. 67 Lubrication
stop value (L)
XXXX (mm)
(inches)
DEFAULT VALUE
PROGRAMMABL
E VALUE
KID KID
2590
32 N=2710
L=2380
LL=2050
37 N=3250
L=2920
LL=2590
44 N=3910
L=3580
LL=3250
68
no. 68 Guide channel
opening max. value
XXXX (mm)
(inches)
DEFAULT VALUE
PROGRAMMABLE
VALUE
KID KID
/ 0