IEMCA KID 80 - Minutes before the Lathe Stop; Closed Collet Speed

2 - INFORMATION FOR USE KID 80 SIV
EN
2 - Pag. 39 / 66
no. 27 Minutes before the lathe
stop
VALUE 0 - The parameter function is
disabled.
VALUE >0 - When the minutes set have
passed, the bar feeder signals the lathe
to stop "FEEDING".
no. 28 Closed collet speed
Defines the "CLOSED collet" speed value.
27
no. 27 Minutes before
lathe
stop
XXXX (min)
DEFAULT VALUE
PROGRAMMABLE
VALUE
KID KID
0 0
28
no. 28 Closed
collet speed
xxxx (%Vmax)
DEFAULT VALUE
PROGRAMMABLE
VALUE
KID KID
20 0