IEMCA KID 80 - Subparameters Display; How to Exit the Protected Parameters; Protected Parameters: Description

3 - INFORMATION FOR SET UP KID 80 SIV
EN
3 - Pag. 7 / 26
3.3 SUBPARAMETERS DISPLAY
Some protected parameters have subparameters.
1. To display them, scroll down the parameter screen by pressing repeatedly:
2. To return to the parameter screen, scroll the screen upwards by pressing repeatedly:
3.4 HOW TO EXIT THE PROTECTED PARAMETERS
1. Exit the "parameter display" mode: [pupa_kid_barra_vert-dx]
3.5 PROTECTED PARAMETERS: DESCRIPTION
Protected parameters are divided into the following sections:
- Parameters for the reference values (§ 3.6)
- Parameters for the axis functions (§ 3.7)
- Interface parameters (§ 3.8)
- General parameters (§ 3.9)