IEMCA KID 80 - Pieces before the Lathe Stop; Start Machining

EN
2 - INFORMATION FOR USE KID 80 SIV
2 - Pag. 38 / 66
no. 26 Pieces before the lathe stop
VALUE 0 - The parameter function is
disabled.
VALUE >0 - When the set value of pieces
machined is reached, the bar feeder calls
the stop of the lathe whilst "FEEDING".
VALUE >0 - Application example.
1.Set value at 1000:
the display shows:
2.Start machining.
After finishing 1,000 pieces, the bar feeder will
command the lathe stop.
the display shows:
To restart machining, the value in brackets
should be reset.
26
no. 26 Pieces before
lathe
stop
xxxxxx (xxxxxx)
DEFAULT VALUE
PROGRAMMABLE
VALUE
KID KID
0 0
no. 26 Pieces before
lathe
stop
:>1000 (0)
no. 26 Pieces before
lathe
stop
:>1000 (1000)