IEMCA KID 80 - Interface Parameters: Description

EN
3 - INFORMATION FOR SET UP KID 80 SIV
3 - Pag. 24 / 26
3.9 INTERFACE PARAMETERS: DESCRIPTION
no. 85 Interface signals
Defines how to manage the interface
signals from the lathe to the bar feeder.
Subparameters:
A - Bar change (0=NO/1=NC)
B - Feeding (0=NO/1=NC)
C - Manual feeding (0=NO/1=NC)
D - Manual return (0=NO/1=NC)
E - Man/Aut from lathe (0=NO/1=NC)
F - Loading cycle (0=NO/1=NC)
G - Feeding stop (0=NO/1=NC)
H - Door safety (0=NO/1=NC)
I - Thread safety (0=NO/1=NC)
L - Start from lathe (0=NO/1=NC)
M - Safeties from lathe (0=NO/1=NC)
N - Start-up (0=NO/1=NC)
O - Working mode (0=NO/1=NC)
85
no. 85 Interface
signals
DEFAULT VALUE
PROGRAMMA
BLE VALUE
KID KID
A
0 0/1
B
0 0/1
C
0 0/1
D
0 0/1
E
0 0/1
F
0 0/1
G
0(0) 0/1
H
1 0/1
I
0 0/1
L
0 0/1
M
1 0/1
N
0 0/1
O
0 0/1