Inovance MD500-PLUS Series - Page 126

Parameter Groups
‑125‑
Min.:
0
Unit:
Hz
Max.: F2‑02 Data type: UInt16
Default:
0.05
Change: In real time
Value Range:
0.00 Hz to F2‑02
Description
F2-21
Maximum output voltage coefficient
Address:
0xF215
Min.:
100
Unit:
‑
Max.: 110 Data type: UInt16
Default:
100
Change: In real time
Value Range:
100–110
Description
This parameter defines the boost capacity of the maximum output voltage of the
AC drive.
Increasing F2‑21 will improve the maximum loading capacity in motor field
weakening area. However, this will increase motor current ripples and heat the
motor. Decreasing F2‑21 will lower the maximum loading capacity in motor field
weakening area. However, this will reduce motor current ripples and motor
heating values. Generally, this parameter needs no modification.
F2-22
Output voltage filter time
Address:
0xF216
Min.:
0
Unit:
s
Max.: 0.01 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0.000s to 0.01s
Description
‑
F2-23
Zero speed lock
Address:
0xF217
Min.:
0
Unit:
‑
Max.: 1 Data type: UInt16
Default:
0
Change:
At stop
Value Range:
0: Disabled
1: Enabled