Parameter Groups
‑198‑
0: Running frequency
1: Frequency reference
2: Output current
3: Output torque
4: Output power
5: Output voltage
6: Pulse input (100.0% corresponds to 100.00 kHz)
7: AI1
8: AI2
9: AI3
10: Length
11: Count value
12: Communication
13: Motor speed
14: Output current (100.0% corresponds to 1000.0 A)
15: Output voltage (100.0% corresponds to 1000.0 V)
16: Output torque (directional)
19: Taper output
20: Roll diameter output
21: Tension output
22: Encoder feedback frequency
Description
This parameter takes effect only when F4‑41 is set to 1.
To Next Page
Loading...
