Parameter Groups
‑222‑
Min.:
0
Unit:
‑
Max.: 0 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0.00 to 0.00
Description
Indicates the function software version of the AC drive.
F7-12
Number of decimal places for load speed display
Address:
0xF70C
Min.:
0
Unit:
‑
Max.: 3 Data type: UInt16
Default:
1
Change: In real time
Value Range:
0: 0 decimal place
1: 1 decimal place
2: 2 decimal places
3: 3 decimal places
Description
This parameter is used to set the number of decimal places of U0‑14 (Load speed).
0: 0 decimal places
No decimal places are retained.
1: 1 decimal place
One decimal place is retained after the decimal point.
2: 2 decimal places
Two decimal places are retained after the decimal point.
3: 3 decimal places
Three decimal places are retained after the decimal point.
F7-13
Accumulative power-on time
Address:
0xF70D
Min.:
0
Unit:
h
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 h to 65535 h
Description
This parameter shows the accumulative power‑on duration of the AC drive.
F7-14
Accumulative power consumption
Address:
0xF70E
To Next Page
Loading...
