Inovance MD500-PLUS Series - Page 246

Parameter Groups
‑245‑
F9-13
Restart interval upon fault reset
Address:
0xF90D
Min.:
0
Unit:
s
Max.: 600 Data type: UInt16
Default:
10
Change: In real time
Value Range:
0.0s to 600.0s
Description
Restart interval upon fault reset
F9-14
1st fault type
Address:
0xF90E
Min.:
0
Unit:
‑
Max.: 99 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0–99
Description
This parameter shows the fault codes of the latest three (1st, 2nd, and 3rd (latest))
faults. The host controller reads the communication address to obtain the fault
code of the AC drive and triggers the AC drive to report the fault. The fault code
can be viewed on the operating panel.
F9-15
2nd fault type
Address:
0xF90F
Min.:
0
Unit:
‑
Max.: 99 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0–99
Description
This parameter shows the fault codes of the latest three (1st, 2nd, and 3rd (latest))
faults. The host controller reads the communication address to obtain the fault
code of the AC drive and triggers the AC drive to report the fault. The fault code
can be viewed on the operating panel.
F9-16
3rd (latest) fault type
Address:
0xF910
Min.:
0
Unit:
‑
Max.: 99 Data type: UInt16
Default:
0
Change: Unchangeable