Inovance MD500-PLUS Series - Page 247

Parameter Groups
‑246‑
Value Range:
0–99
Description
This parameter shows the fault codes of the latest three (1st, 2nd, and 3rd (latest))
faults. The host controller reads the communication address to obtain the fault
code of the AC drive and triggers the AC drive to report the fault. The fault code
can be viewed on the operating panel.
F9-17
Frequency upon the 3rd fault (latest)
Address:
0xF911
Min.:
0
Unit:
Hz
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 Hz to 65535 Hz
Description
This parameter shows the frequency of the AC drive upon the latest fault.
F9-18
Current upon the 3rd fault (latest)
Address:
0xF912
Min.:
0
Unit:
A
Max.: 6553.5 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0.0 A to 6553.5 A
Description
This parameter shows the current of the AC drive upon the latest fault.
F9-19
Bus voltage upon 3rd fault (latest)
Address:
0xF913
Min.:
0
Unit:
V
Max.: 6553.5 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0.0 V to 6553.5V
Description
This parameter shows the bus voltage of the AC drive upon the latest fault.
F9-20
Input terminal state upon the 3rd fault (latest)
Address:
0xF914
Min.:
0
Unit:
‑