Inovance MD500-PLUS Series - Page 282

Parameter Groups
‑281‑
Value Range:
1 to 65535
Description
When the count value reaches FB‑08, the DO outputs an active signal indicating
that the count value has reached.
FB-09
Designated count value
Address:
0xFB09
Min.:
1
Unit:
‑
Max.: 65535 Data type: UInt16
Default:
1000
Change: In real time
Value Range:
1 to 65535
Description
When the count value reaches FB‑09, the DO outputs an active signal indicating
that the designated count value has reached. FB‑09 must be lower than or equal
to FB‑08 (Set count value).
FB-10
Revolution count reset mode
Address:
0xFB0A
Min.:
0
Unit:
‑
Max.: 1 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0: Rising edge triggered
1: Level triggered
Description
Used to set the revolution counting reset mode.
0: Rising edge triggered
1: Level triggered
FB-11
Revolution count reset signal
Address:
0xFB0B
Min.:
0
Unit:
‑
Max.: 1 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0: Disable
1: Enable
Description
Clear the number of revolutions. When this parameter is set to 1, the number of
revolutions is cleared.