Inovance MD500-PLUS Series - Page 307

Parameter Groups
‑306‑
0 to 65535
Description
This parameter is used to monitor the bus load. It defines the number of CAN
frames received by the station per second.
It is valid only for the CANlink communication expansion card.
FD-15
Maximum value of error counters received by the node
Address:
0xFD0F
Min.:
0
Unit:
‑
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter is used to monitor bus errors. It defines the maximum value of
error counters received by the node through CAN.
It is valid only for the CANlink communication expansion card.
FD-16
Maximum value of error counters sent by the node
Address:
0xFD10
Min.:
0
Unit:
‑
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter is used to monitor bus errors. This parameter defines the
maximum value of error counters sent by the node through CAN.
It is valid only for the CANlink communication expansion card.
FD-17
Bus disconnection times per unit of time
Address:
0xFD11
Min.:
0
Unit:
‑
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter is used to monitor bus errors. This parameter defines the CAN bus
disconnection times of the node.
It is valid only for the CANlink communication expansion card.