Inovance MD500-PLUS Series - Page 358

Parameter Groups
‑357‑
Description
This parameter defines the x axis of inflexion 1 on AI curve 4, that is, the analog
input voltage or current at inflexion 1.
A6-03
Percentage corresponding to curve 4 inflexion point 1 input
Address:
0xA603
Min.:
‑100
Unit:
%
Max.: 100 Data type: Int16
Default:
30
Change: In real time
Value Range:
‑100.0% to +100.0%
Description
This parameter defines the y axis of inflexion 1 on AI curve 4, that is, the setting
value at inflexion 1.
A6-04
Curve 4 inflexion 2 input
Address:
0xA604
Min.:
A6‑02
Unit:
V
Max.: A6‑06 Data type: Int16
Default:
6
Change: In real time
Value Range:
A6‑02 to A6‑06
Description
This parameter defines the x axis of inflexion 2 on AI curve 4, that is, the analog
input voltage or current at inflexion 2.
A6-05
Corresponding setting of curve 4 inflexion 2 input
Address:
0xA605
Min.:
‑100
Unit:
%
Max.: 100 Data type: Int16
Default:
60
Change: In real time
Value Range:
‑100.0% to +100.0%
Description
This parameter defines the y axis of inflexion 2 on AI curve 4, that is, the setting
value at inflexion 2.
A6-06
Curve 4 maximum input
Address:
0xA606
Min.:
A6‑04
Unit:
V
Max.: 10 Data type: Int16