Inovance MD500-PLUS Series - Page 361

Parameter Groups
‑360‑
Description
This parameter defines the y axis of inflexion 2 on AI curve 5, that is, the setting
value at inflexion 2.
A6-14
Curve 5 maximum input
Address:
0xA60E
Min.:
A6‑12
Unit:
V
Max.: 10 Data type: Int16
Default:
10
Change: In real time
Value Range:
A6‑12 to 10.00 V
Description
This parameter defines the x axis of the maximum input point on AI curve 5, that
is, the maximum analog input voltage or current.
A6-15
Percentage corresponding to curve 5 maximum input
Address:
0xA60F
Min.:
‑100
Unit:
%
Max.: 100 Data type: Int16
Default:
100
Change: In real time
Value Range:
‑100.0% to +100.0%
Description
This parameter defines the y axis of the maximum input point on AI curve 5, that
is, the setting value that the AI maximum input value corresponds.
A6-16
AI1 gain
Address:
0xA610
Min.:
‑10
Unit:
‑
Max.: 10 Data type: Int16
Default:
1
Change: In real time
Value Range:
–10.00 to +10.00
Description
This parameter defines the AI1 voltage correction gain.
A6-17
AI1 offset
Address:
0xA611
Min.:
‑100
Unit:
%
Max.: 100 Data type: Int16
Default:
0
Change: In real time