Inovance MD500-PLUS Series - Page 433

Parameter Groups
‑432‑
B1-26
Multi-friction force compensation inflection point 2
Address:
0xB11A
Min.:
0
Unit:
Hz
Max.: F0‑10 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0.00 Hz to value of F0‑10
Description
Used for multi‑section friction force compensation curves 1 and 2.
When B1‑18 is set to 2, parameters B1‑19 to B1‑24 take effect. When B1‑18 is set to
3, B1‑19 to B1‑30 take effect.
B1-27
Multi-friction force compensation inflection point 3
Address:
0xB11B
Min.:
0
Unit:
Hz
Max.: F0‑10 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0.00 Hz to value of F0‑10
Description
Used for multi‑section friction force compensation curves 1 and 2.
When B1‑18 is set to 2, parameters B1‑19 to B1‑24 take effect. When B1‑18 is set to
3, B1‑19 to B1‑30 take effect.
B1-28
Multi-friction force compensation inflection point 4
Address:
0xB11C
Min.:
0
Unit:
Hz
Max.: F0‑10 Data type: UInt16
Default:
0
Change: In real time
Value Range:
0.00 Hz to value of F0‑10
Description
Used for multi‑section friction force compensation curves 1 and 2.
When B1‑18 is set to 2, parameters B1‑19 to B1‑24 take effect. When B1‑18 is set to
3, B1‑19 to B1‑30 take effect.
B1-29
Multi-friction force compensation inflection point 5
Address:
0xB11D
Min.:
0
Unit:
Hz
Max.: F0‑10 Data type: UInt16
Default:
0
Change: In real time