Inovance MD500-PLUS Series - Page 439

Parameter Groups
‑438‑
B2-08
Minimum winding diameter taper
Address:
0xB208
Min.:
0
Unit:
%
Max.: 100 Data type: UInt16
Default:
100
Change: In real time
Value Range:
0.0% to 100.0%
Description
Taper corresponding to the minimum winding diameter
B2-09
Linear taper switchover point 1
Address:
0xB209
Min.:
B0‑09
Unit:
mm
Max.: B0‑08 Data type: UInt16
Default:
150
Change: In real time
Value Range:
B0‑09 to B0‑08
Description
Winding diameter 1 set by multi‑point linear taper curve
B2-10
Taper of switchover point 1
Address:
0xB20A
Min.:
0
Unit:
%
Max.: 100 Data type: UInt16
Default:
100
Change: In real time
Value Range:
0.0% to 100.0%
Description
Taper 1 set by multi‑point linear taper curve
B2-11
Linear taper switchover point 2
Address:
0xB20B
Min.:
B2‑09
Unit:
mm
Max.: B0‑08 Data type: UInt16
Default:
200
Change: In real time
Value Range:
B2‑09 to B0‑08
Description
Winding diameter 2 set by multi‑point linear taper curve
B2-12
Taper of switchover point 2
Address:
0xB20C