Inovance MD500-PLUS Series - Page 440

Parameter Groups
‑439‑
Min.:
0
Unit:
%
Max.: 100 Data type: UInt16
Default:
90
Change: In real time
Value Range:
0.0% to 100.0%
Description
Taper 2 set by multi‑point linear taper curve
B2-13
Linear taper switchover point 3
Address:
0xB20D
Min.:
B2‑11
Unit:
mm
Max.: B0‑08 Data type: UInt16
Default:
250
Change: In real time
Value Range:
B2‑11 to B0‑08
Description
Winding diameter 3 set by multi‑point linear taper curve
B2-14
Taper of switchover point 3
Address:
0xB20E
Min.:
0
Unit:
%
Max.: 100 Data type: UInt16
Default:
80
Change: In real time
Value Range:
0.0% to 100.0%
Description
Taper 3 set by multi‑point linear taper curve
B2-15
Linear taper switchover point 4
Address:
0xB20F
Min.:
B2‑13
Unit:
mm
Max.: B0‑08 Data type: UInt16
Default:
300
Change: In real time
Value Range:
B2‑13 to B0‑08
Description
Winding diameter 4 set by multi‑point linear taper curve
B2-16
Taper of switchover point 4
Address:
0xB210
Min.:
0
Unit:
%