Inovance MD500-PLUS Series - B6 Communication Free Mapping Configuration Parameters

Parameter Groups
‑440‑
Max.: 100 Data type: UInt16
Default:
70
Change: In real time
Value Range:
0.0% to 100.0%
Description
Taper 4 set by multi‑point linear taper curve
B2-17
Linear taper switchover point 5
Address:
0xB211
Min.:
B2‑15
Unit:
mm
Max.: B0‑08 Data type: UInt16
Default:
400
Change: In real time
Value Range:
B2‑15 to B0‑08
Description
Winding diameter 5 set by multi‑point linear taper curve
B2-18
Taper of switchover point 5
Address:
0xB212
Min.:
0
Unit:
%
Max.: 100 Data type: UInt16
Default:
50
Change: In real time
Value Range:
0.0% to 100.0%
Description
Taper 5 set by multi‑point linear taper curve
B2-19
Taper at maximum roll diameter
Address:
0xB213
Min.:
0
Unit:
‑
Max.: 100 Data type: UInt16
Default:
30
Change: In real time
Value Range:
0.0–100.0
Description
Taper corresponding to the maximum roll diameter.