Inovance MD500-PLUS Series - Page 659

Function Application
‑658‑
Para. Name
Value Range
Description
F7‑03 LED
running
display
parame
ter 1
BIT00: Running frequency
(Hz)
BIT01: Frequency reference
(Hz)
BIT02: Bus voltage (V)
BIT03: Output voltage (V)
BIT04: Output Current (A)
BIT05: Output power (kW)
BIT06: Output torque (%)
If a parameter needs to be
displayed during running, set its
corresponding bit to 1. After
converting this binary number to a
hexadecimal number, set it in F7‑
03.
Continued
Contin
ued
BIT07: DI state
BIT08: DO state
BIT09: AI1 voltage (V)
BIT10: AI2 voltage (V)
BIT11: AI3 voltage (V)
BIT12: Count value
BIT13: Length value
BIT14: Load speed display
BIT15: PID setting
Continued
F7‑04 LED
running
display
parame
ter 2
BIT00: PID feedback
BIT01: PLC stage
BIT02: Pulse setting
frequency (kHz)
BIT03: Running frequency 2
(Hz)
BIT04: Remaining running
time
BIT05: AI1 voltage before
correction (V)
If a parameter needs to be
displayed during running, set its
corresponding bit to 1. After
converting this binary number to a
hexadecimal number, set it in F7‑
04.
Continued
Contin
ued
BIT06: AI2 voltage before
correction (V)
BIT07: AI2 voltage before
correction (V)
BIT08: Linear speed
BIT09: Current power‑on
time (hour)
BIT10: Current running
time (min)
BIT11: Pulse input
frequency (Hz)
BIT12: Communication
setting value
BIT13: Encoder feedback
speed (Hz)
BIT14: Roll diameter (mm)
BIT15: Tension reference
after taper setting (N)
Continued