Maintenance
Access Apertures
Close
1. Close the cover.
2. Make sure the cover is correctly latched.
3. Use the ignition key to lock the cover.
Rear Counterweight Door
WARNING Make sure that the machine is parked on the solid, level ground before opening the rear
counterweight door. Opening the rear counterweight door while machine is parked on an inclined surface
can cause a stability hazard.
WARNING Do not operate the machine with rear counterweight door opened. Safety hazard could occur.
WARNING Make sure that the operator station door is closed (not latched in open position) and operating
area is clear of people before opening the rear counterweight door otherwise damage to the machine or
personnel injury could occur.
Figure 95.
A Rear counterweight door
Open
Before opening the rear counterweight door, make sure that the machine is parked on solid, level ground.
Opening the rear counterweight door while machine is parked on an inclined surface can cause a stability
hazard. Refer to Figure 96.
120 9831/8250-4 120
JCB © Admin Pimteam - 23/06/2021 05:32.
To Next Page
Loading...
