JOHNSON CONTROLS
328
FORM 201.23-NM2
ISSUE DATE: 3/9/2015
SECTION 9 - MAINTENANCE
OPERATING LOG SHEET
SITE AND CHILLER INFORMATION
JOB NAME:
LOCATION:
SALES ORDER #:
TECHNICIAN NAME:
CHILLER MODEL #:
SERIAL #:
START DATE:
COMPRESSOR # 1 - MODEL #:
COMPRESSOR # 2 - MODEL #:
COMPRESSOR # 3 - MODEL #:
COMPRESSOR # 4 - MODEL #:
SERIAL #:
PROGRAMMED VALUES
CHILLED LIQUID SETPOINT
Setpoint = ºF(ºC)
Range = +/- ºF(ºC)
Display Language =
Chilled Liquid Mode =
Local/Remote Mode =
Display Units =
Lead/Lag Control =
Remote Temperature Reset =
Remote Current Reset =
PROGRAMMED CUTOUTS
Suction Pressure Cutout = PSIG (kPa)
Low Ambient Cutout = ºF(ºC)
Leaving Chilled Liquid Temp. Cutout =
ºF(ºC)
High Motor Current Unload = %FLA
To Next Page
Loading...
