4-21
(4) Selecting BRG/DIST
a) Tap .
b) When a waypoint position screen is displayed, tap WPT POSN.
c) Set a starting position, a bearing, and a distance.
The submenu for setting a starting position is outlined below.
(1) OWN SHIP: Set an own ship’s position.
(2) MANUAL: Set any latitude and longitude.
(3) PLOT: Set a cursor position from the plotting screen.
(4) WP LIST: Select from a waypoint list.
(5) EVENT LIST: Select from an event mark list.
(6) PRE WPT: Set the previous waypoint as the starting position.
d) Confirm the setting by tapping .
e) Set a comment, a symbol, and a colour and tap .
(5) Selecting EVENT LIST
a) Tap .
b) An event mark list is displayed.
c) Select a number of the event mark you want to register.
d) Set a comment, a symbol, and a colour and tap .
Item Description
STARTING POINT Enter a startin
point.
BRG Enter a bearin
.
DIST Enter a distance.
Enter a starting
position, a bearing,
and a distance.
When you want to register number 001,
tap 001.
To Next Page
Loading...
Need help?
General
